material loading manipulator for vertical injection molding machine

material loading manipulator 1.ISO offered 2.injection range 50-180ton 3.vertical stroke 550-650mm 4.crosswise stroke 120mm

Parameter sheet of the manipulator:

 

Model	L-550		L-650
type	Single-stage
IMM range (TON)	12-150	80-150
Vertical stroke(mm)	550		650
Side-entry stroke(mm)	75		75
Swing angle(°)	50-90		60-90
Gripper rotation angle(°)	180		180
Max. load(with tool)(kg)	2		2
Min. take time(sec.)	0.8		0.9
Dry cycle time(sec.)	4.2		4.4
Drive system	Pressure
Working air pressure	0.5-0.7(MPa)
Air consumption(L/cycle)	7.6		7.7
Power consumption(KVC)	0.2		0.2
power	AC220V 50/60HZ
Weight(kg)	38		39

Introductions:

The material loading manipulator is extensively applied to horizontal / vertical plastic injection machines ranging from 50T~ 250T which can rapid take out the runners, runner and finished products from the mold of plastic injection molding machines, and place runners or runner into beside-the-press granulator for recycling immediately. There are two types of arms-single stage and telescopic. The vertical stroke for single stage is 550mm and for telescopic is 650mm. This series equipped with wrist rotation mechanism and gripper sensor can rotate products with 90°.

Model Features:

 

1.X-650 are mainly used for removal of runner or finished products independently; also can be used for removal of runner and finished products from 2 plate mold simultaneously.

2.X-650PR are mainly used for removal of runner & runner and finished products from 3 plate mold simultaneously and any arm can be used independently for remove finished parts or runner.

material loading manipulator for vertical injection molding machine